projector paint wall

Projector Paint

Projector Paint

Projector Paint

Projector Mounts from Loxit.com

If you are investing in an expensive projector system it is important you consider the issue of mounting this equipment carefully. The mount will impact on the effectiveness of the projector and also its security and safety.  There are a number of different types of mounts available and you will need to select the right mount for your equipment and projection requirements.

Ventilation

When you are mounting your projector it is important to consider ventilation.  Projector equipment can give off a lot of heat and this is the reason they have integral cooling fans. However if you mount your projector system in a confined area then the cooling fan will no longer be sufficient and your equipment can overheat.  Projectors can be expensive to repair so you do need to choose the right mount and positioning for your equipment.

Design

You will need to carefully check the design of your mount.  If brackets or parts are blocking the fan outlet you could overheat your projector even when you have taken care to mount it in a well ventilated area.  Mounts with large flat plate designs can trap heat close to the projector.  Frame and lattice designs allow the heat to dissipate more effectively.

Steel mounts are strong and durable but this metal is not an efficient conductor of heat.  This means that heat can be trapped near the projector resulting in overheating.  Aluminium is a much better conductor of heat than steel and is also strong and durable.  This can be a better choice to help prevent your projector equipment from overheating.

Frame Finish

If you are buying a aluminium projector mount check that it has a protective finish.  Even though aluminium is resistant to corrosion it is not invincible and will last much longer if it has been finished with a paint or powder coating.

Balance

Most projector casings are made of plastic.  This is a hardwearing material that will last a long time.  However when you mount your projector, you do need to take care that you balance the equipment carefully so that no single area is receiving any unnecessary pressure.  Plastic casings can crack over time if they are mounted incorrectly and cables can pull free and get damaged if they are placed in stress situations.

Cable Management

If you are mounting your projector unit at ceiling height then you should be able to easily route cables in a discreet way around the top of the room or through the ceiling itself.  Some companies also offer cable management mounts which provide holes and clips. These allow you to organize wires more effectively, but you must take care these cable management systems are compatible with your equipment.  If you have to force cables into holes or clips it can cause them to bend and become damaged.

How to Interior Design a Bedroom 3 looks


Goo Systems Projector Screen Paint Kit - CRT White
Goo Systems Projector Screen Paint Kit - CRT White
Sale Price: $220.00
See Reviews For This Product
Screen Goo Ultra Black Quantity: 1000 mL
Screen Goo Ultra Black Quantity: 1000 mL
Sale Price: $21.99
  Eligible for free shipping!
Availability: Usually ships in 2-3 business days
See Reviews For This Product

Description

4606 Quantity: 1000 mL One of the critical parts of a screen is the black border, which gives your eye a dark reference point, and thereby improves color contrast. This Ultra Black paint is a nonreflective matte black screen paint designed to absorb light and improve your screen. It works well applied either around a screen painted onto a wall, or to a frame built around the screen.

Screen Goo CRT White Basecoat Quantity: 1000 mL
Screen Goo CRT White Basecoat Quantity: 1000 mL
Sale Price: $29.99
  Eligible for free shipping!
Availability: Usually ships in 2-3 business days
See Reviews For This Product

Description

4193 Quantity: 1000 mL Screen Goo is an alternative to expensive projection screens which allows a fully functional projector screen to be painted directly onto a wall. These painted screens are capable of vibrant color definition and superb reflectivity. The CRT White Basecoat is designed to be used under the CRT White Topcoat. The white color allows for accurate color reproduction and wide viewing angles. Need help determining which Goo to use? Click here for the Goo Calculator! About Goo Systems' Screen Goo Goo Systems' Screen Goo products are specially formulated, color corrected, screen coatings in liquid form. They are designed to achieve the highest performance levels possible for a given display situation, and is used by all levels of the video industry: from do-it-yourself home theater aficionados to large scale commercial and industrial clients. Designed for easy application via spraying or rolling, screen goo products can be successfully applied by the novice or professional alike. The Topcoat and Basecoat work together; both are required to create a screen. Topcoat and Basecoat coverage per sq. ft. can vary somewhat, depending on the surface conditions. 1 liter (just slightly more than a US Quart in volume) will typically cover approximately 50 sq. ft. with two thin coats, under ideal conditions on an ideal non-absorptive surface. Starting with a primed white surface is strongly recommended for peak performance.

Interfit INT499 Replacement Modeling Lamp for Interfit Stellar Series Lamp Heads
Interfit INT499 Replacement Modeling Lamp for Interfit Stellar Series Lamp Heads
List Price: $10.00
Sale Price: $9.99
You save: $0.01 (%)
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product

Description

You never know when your modeling lamp will need to be replaced, keep an extra on hand. This bulb is a replacement for the Interfit heads Stellar, Stellar X & Stellar XD, Stellar Xtreme 150 Watt/ Second & 300 Watt/ Second.

Interfit INT515 Replacement 60 Watt Modeling Lamp Interfit EX150Mark1 and EXD200
Interfit INT515 Replacement 60 Watt Modeling Lamp Interfit EX150Mark1 and EXD200
List Price: $9.66
Sale Price: $8.99
You save: $0.67 (7%)
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product

Description

You never know when your modeling lamp will need to be replaced, keep an extra on hand. This bulb is a replacement for the Interfit heads EX150Mark1 and EXD200.

58
58" X 100" Matte White Front Projection Screen Material, Projector Screen, Movie Screen
List Price: $99.99
Sale Price: $59.99
See Reviews For This Product

Description

This is a 100% fiberglass projection screen material with a PVC coating. The material has a 1.0 gain and a 110 degree viewing angle.

Features

  • Matte White Projection Screen Material
Interfit INT329 Replacement Lamp 1000w for SolarLite INT095
Interfit INT329 Replacement Lamp 1000w for SolarLite INT095
List Price: $39.99
Sale Price: $33.64
You save: $6.35 (16%)
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product

Description

You never know when you will need one, keep an extra bulb on hand. This INT329 is a 1000w replacement lamp for the Interfit SolarLite INT095

Optoma EP-771 3000 Lumen Multimedia Data Projector
Optoma EP-771 3000 Lumen Multimedia Data Projector
Sale Price: $1,299.99
  Eligible for free shipping!
Availability: Usually ships in 24 hours
See Reviews For This Product

Description

Product Name: Professional EP771 MultiMedia ProjectorMarketing Information: The Optoma EP771 redefines the multimedia data projector category. With built-in audio, 3000 lumens, a 2300:1 contrast ratio and a sleek new form factor, the EP771 takes bright and powerful to the next level. An elegant solution to multimedia presentations, Optoma"s EP771 can be classified as a true statement.Product Type: DLP MultiMedia ProjectorTechnical InformationLamp Type: 230WLamp Life: 2000 Hour(s) High Brightness ModeLamp Life: 3000 Hour(s) StandardLamp Life: 4000 Hour(s) Economy ModeVideo Signals: NTSC M, 3.58, 4.43Video Signals: PAL B, D, G, H, I, M, NVideo Signals: SECAM B, D, G, K, K1, LVideo Signals: HDTV 480p, 576i, 576p, 720p, 1080iInterfaces: 1 x DVI-D (Digital) Interfaces: 1 x HD DB-15 - Video InputInterfaces: 1 x HD DB-15 - Video OutputInterfaces: 1 x S-Video Interfaces: 1 x RCA - Composite Video InputInterfaces: 1 x D-Sub (DB-9) - RS-232 Interfaces: 1 x USB Interfaces: 1 x Mini Jack - Audio InputInterfaces: 1 x Mini Jack - Audio OutputInterfaces: 2 x RCA (Left/Right) - Audio InputImage InformationColor Support: 16.7 Million Colors (24-bit)Brightness: 3000 LumensDisplay Modes: 1024 x 768 XGA NativeDisplay Modes: 1400 x 1050 SXGA+ SupportedDisplay Modes: 640 x 480 VGA SupportedDisplay Modes: 800 x 600 SVGA SupportedDisplay Modes: 1280 x 1024 SXGA SupportedProjection Distances: 4.92ft to 39.37ftDiagonal Image Size: 27.5" to 306"Zoom: Manual ZoomContrast Ratio: 2300:1Physical CharacteristicsWeight: 7.3 lb WarrantyStandard Warranty: 1 Year(s) Limited

Features

  • Bright 3000 ANSI lumens with 2300:1 contrast ratio
  • Native XGA (1024 x 768) with support up to SXGA+ (1400 x 1050)
  • Portable at 7.3 pounds and attractive form factor
  • Fully featured IR remote with laser pointer and mouse
  • Recessed focus & zoom controls eliminate accidental adjustments

Tags: , , , , , , , , ,

Sunday, January 2nd, 2011 1080p projectors Comments Off